UNIRAC SOLARMOUNT END CLAMP E 50-52MM DARK 302024D

UNIRAC SolarMount End Clamp E Dark 302024D, 50-52mm (1.97-2.05in), 2.50in T-bolt,
Package of 1 
Provides bond from rail to endclamp. 
Pre-assembled aluminum clamp. 
Supplied washer keeps clamp and bolt upright for ease of assembly. 
SOLARMOUNT is covered by a 10 year limited product warranty and a 5 year limited finish warranty

SKU 302024D Category
Brand:UniRac

Out of stock

Description

Characteristics
Manufacturer Unirac
Model 302024D
Rated Power Output [W] 1
Depth [mm (in)] 50-52mm (1.97-2.05in)
Warranty [Years] 10

Brand

UniRac

Features

UNIRAC SolarMount End Clamp E 50-52mm Dark 302024D 

UNIRAC SolarMount End Clamp E Dark 302024D, 50-52mm (1.97-2.05in), 2.50in T-bolt,
Package of 1 
Provides bond from rail to endclamp. 
Pre-assembled aluminum clamp. 
Supplied washer keeps clamp and bolt upright for ease of assembly. 
SOLARMOUNT is covered by a 10 year limited product warranty and a 5 year limited finish warranty


Installation Instructions:
INSTALL MODULE ENDCLAMPS: The Endclamp is supplied as an assembly with a T-bolt, serrated flange nut, and washer. The washer retains the clamp at the top of the assembly. This will enable the clamp to remain upright for module installation. 

INSERT ENDCLAMP T-BOLT: Insert 1/4” T-bolt into rail. 

ROTATE ENDCLAMP T-BOLT: Rotate T-bolt into position. Verify that the position indicator & T-bolt shaft are angled in the correct position.
End clamps are positioned on rails prior to the first end module and installed after the last end module. 


INSTALL FIRST MODULE: Install the first end module onto rails. Engage module frame with Endclamps.
Verify that the position indicator & T-bolt shaft are angled in the correct position.

POSITION INDICATOR – SERRATED T-BOLT: Verify the T-bolt position indicator is perpendicular to the rail.

TRIM ENDCLAMPS: Install Endclamps on Trim in like manner to module endclamps per install instructions above.


TORQUE VALUE 1/4” nuts to 10 ft-lbs w/ Anti Seize