UNIRAC SOLARMOUNT END CLAMP C 34-36 MM CLEAR 302022C

Features

UNIRAC SolarMount End Clamp C Clear 302022C

UNIRAC SolarMount End Clamp C Clear 302022C, 
34-36mm (1.34-1.42in), 2 in T-bolt, 
Package of 1 
Provides bond from rail to endclamp. 
Pre-assembled aluminum clamp. 
Supplied washer keeps clamp and bolt upright for ease of assembly. 
SOLARMOUNT is covered by a 10 year limited product warranty and a 5 year limited finish warranty


Installation Instructions:
INSTALL MODULE ENDCLAMPS: The Endclamp is supplied as an assembly with a T-bolt, serrated flange nut, and washer. The washer retains the clamp at the top of the assembly. This will enable the clamp to remain upright for module installation. 

INSERT ENDCLAMP T-BOLT: Insert 1/4” T-bolt into rail. 

ROTATE ENDCLAMP T-BOLT: Rotate T-bolt into position. Verify that the position indicator & T-bolt shaft are angled in the correct position.
End clamps are positioned on rails prior to the first end module and installed after the last end module. 

INSTALL FIRST MODULE: Install the first end module onto rails. Engage module frame with Endclamps.
Verify that the position indicator & T-bolt shaft are angled in the correct position.

POSITION INDICATOR – SERRATED T-BOLT: Verify the T-bolt position indicator is perpendicular to the rail.

TRIM ENDCLAMPS: Install Endclamps on Trim in like manner to module endclamps per install instructions above.

TORQUE VALUE 1/4” nuts to 10 ft-lbs w/ Anti Seize