Midnite Solar MNXWP5548D-2CL200 Pre-Wired DC Coupled System

Description

This is a grid-tied system with battery backup. Battery bank sold separately.

Midnite Solar pre-wired inverter systems offer a turn key solution to installing a battery based inverter system, saving you time in the field.

With a pre-wired solution all of the confusion is taken out of selecting all the right parts. This system uses the 2 of the Schneider Electric Conext XW+ inverters, each rated at 5,500 watts and using a common 48 volt battery. It produces 120/240 volts AC and has a two separate AC inputs. Don’t forget to look at our other products that compliment the pre-wired inverter system like our Battery Boxes or Disconnecting Combiners.

Our pre-wired systems can be configured in about any way needed with any of the common battery based inverters (except Outback). Please contact us for a quote if the System you need is not listed. Below is a simple list of the major components included in the system.

The Whizbang Jr (MNWBJR) current sense module for Classic provides battery state of charge and is included with this product. This system is also available using the Schneider Conext XW+ 6848

FEATURES: Environmental Rating – Type 1 (Indoor) Two Schneider Electric XW Pre-Wired 5548 120/240 vac Inverter for Off Grid or Battery based Grid tie Schneider System Control panel Two MNE250XW Plus E-Panel AC Bypass Assembly Two Classic 200 charge controller with DC-GFP (Ground Fault protection) and Arc Fault protection built in. Two MNSPD300’s (Surge Protection Devices) Two 250 amp Battery Main Breaker for the XW Inverter Warranty – 5 yrs. MidNite E-Panel, Classic Charge Contoller and SPD’s made in the USA Schneider XW Inverter made in China Listed by ETL for US & Canada. General labor for assembly, test and crating included Truck Freight Only. We also carry 2CL150, 2CL250, 3CL150, 3CL200, 3CL250, 4CL150, 4CL200, 4CL250 for this model.