Solar modules, racking and battery bank not included.
This system is designed to retrofit an existing grid-tied system and convert it to a grid-tied battery backup system. Battery bank sold separately.
Midnite Solar pre-wired inverter systems offer a turn key solution to installing a battery based inverter system, saving time in the field.
With a pre-wired solution all of the confusion is taken out of selecting all the right parts. Hookup between inverters done with included wire and conduit. This system uses 3 of the SMA Sunny Island inverters that are rated at 6,000 watts each and uses a 48 volt battery. It produces 3 Phase AC and has a single AC input. Don’t forget to look at our other products that compliment the pre-wired inverter system like our Battery Boxes or Disconnecting Combiners.
Our pre-wired systems can be configured in about any way needed with any of the common battery based inverters (except Outback). Please contact us for a quote if the System you need is not listed. Below is a simple list of the major components included in the system.
FEATURES: Environmental Rating – Type 1 (Indoor) Three SMA Sunny Islands Pre-Wired 6048s 120/240 vac Inverters for Off Grid or Battery based Grid tie MNE250SMA-3PH MASTER – (E-Panel) Two MNE250SMA-SLAVE – (E-Panels) AC Bypass Assembly, 3Phase Three MNSPD300’s (Surge Protection Devices) Three 250 amp Battery Main Breakers for the Sunny Islands Warranty – 5 yrs. Listed by ETL for US & Canada MidNite E-Panel and SPD’s made in the USA SMA Sunny Island made in Germany General labor for assembly, test and crating included Truck Freight Only. We also carry with CL150 CL200, CL250 in all of our AC couple system.
| Weight | 675 lbs |
|---|---|
| Dimensions | 56 × 28 × 57 in |
© Copyright 2022 Solerus Energy · Designed and Developed by RETHEMED
