This is a grid-tied system with battery backup. Battery bank sold separately.
Midnite Solar pre-wired inverter systems offer a turn key solution to installing a battery based inverter system, saving time in the field.
With a pre-wired solution all of the confusion is taken out of selecting all the right parts. Hookup between inverters done with included wire and conduit. This system uses 2 of the SMA Sunny Island inverter that are rated at 6,000 watts each and uses a 48 volt battery. It produces 120/240 volts AC and has a single AC input. Don’t forget to look at our other products that compliment the pre-wired inverter system like our Battery Boxes or Disconnecting Combiners.
Our pre-wired systems can be configured in about any way needed with any of the common battery based inverters (except Outback). Please contact us for a quote if the System you need is not listed. Below is a simple list of the major components included in the system.
The Whizbang Jr. current sense module for Classic provides battery state of charge and is included with this product.
FEATURES: Environmental Rating – Type 1 (Indoor) Two SMA Sunny Islands Pre-Wired 6048 120/240 vac Inverters for Off Grid or Battery based Grid tie Two MNE250SMA E-Panels AC Bypass Assembly Two Classic 150 charge controller with DC-GFP (Ground Fault protection) and Arc Fault protection built in. Two MNSPD300’s (Surge Protection Devices) Two 250 amp Battery Main Breakers for the Sunny Islands Warranty – 5 yrs. Listed by ETL for US & Canada. MidNite E-Panel, Classic Charge Contoller and SPD’s made in the USA SMA Sunny Island Inverter made in Germany General labor for assembly, test and crating included Truck Freight Only. We also carry 2CL200, 2CL250, 3CL150, 3CL200, 3CL250, 4CL150, 4CL200, & 4CL250 for this product.