Midnite Solar MNSI6048-CL200-RSS Pre-Wired DC Coupled System

Description

This is a grid-tied system with battery backup. Battery bank sold separately.

Midnite Solar pre-wired inverter systems offer a turn key solution to installing a battery based inverter system, saving time in the field.

With a pre-wired solution all of the confusion is taken out of selecting all the right parts. This system uses the SMA Sunny Island inverter that is rated at 6,000 watts and uses a 48 volt battery. It produces 120 volts AC and has a single AC input. MidNite does offer an automatic transfer relay that can be installed in the E-panel that will allow the Sunny Island to automatically select between two AC inputs (For example the grid or generator). Don’t forget to look at our other products that compliment the pre-wired inverter system like our Battery Boxes or Disconnecting Combiners.

Our pre-wired systems can be configured in about any way needed with any of the common battery based inverters (except Outback). Please contact us for a quote if the System you need is not listed. Below is a simple list of the major components included in the system.

FEATURES: Environmental Rating – Type 1 (Indoor) SMA Sunny Island Pre-Wired 6048 120 vac Inverter for Off Grid or Battery based Grid tie MNE250SMA E-Panel AC Bypass Assembly Classic 200 charge controller with DC-GFP (Ground Fault protection) and Arc Fault protection built in. Two MNSPD300’s (Surge Protection Devices) 250 amp Battery Main Breaker for the Sunny Island Warranty – 5 yrs. Listed by ETL for US & Canada MidNite E-Panel, Classic Charge Contoller and SPD’s made in the USA SMA Sunny Island Inverter made in Germany General labor for assembly, test and crating included The Whizbang Jr current sense module for Classic provides battery state of charge and is included with this product. Truck Freight Only. We also carry CL150, CL250, 2CL150, 2CL200 & 2CL250 in this product.