Description
Features
- Easy to Install – Lightweight and simple. Faster installation with improved, lighter two-wire cabling. Built-in rapid shutdown compliant (NEC 2014&2017)
- Efficient and Reliable – Optimized for high powered 96-cell modules. Highest CEC efficiency of 97.5%. More than a million hours of testing. Class II double-insulated enclosure. UL listed.
- Smart Grid Ready – Complies with advanced grid support, voltage and frequency ride-through requirements. Remotely updates to respond to changing grid requirements. Configurable for varying grid profiles. Meets CA Rule 21 (UL 1741-SA).
General Information
- Manufacturer: Enphase Energy
- Product Line: IQ7 Series
- Model ID: IQ7X-96-2-US
Mechanical Data
- Technology: Micro-Inverter
- Dimensions: 8.35 x 6.89 x 1.19 Inches
- Weight: 2.38 lbs
- Connector Type: MC4 (or Amphenol H4 UTX with Additional Q-DCC-5 Adapter)
- Cooling: Natural convection – No Fans
- Approved for Wet Locations: Yes
- Pollution Degree: PD3
- Enclosure: Class II Double-Insulated, Corrosion Resistant Polymeric Enclosure
- Environmental Category / UV Exposure Rating: NEMA Type 6 / Outdoor
- Communication: Power Line Communication (PLC)
- Monitoring: Enlighten Manager and MyEnlighten Monitoring Options. Compatible with Enphase IQ Envoy
- Disconnecting Means: The AC and DC Connectors Have Been Evaluated and Approved by UL for Use as the
- Load-Break Disconnect Required by NEC 690
- Ambient Temperature Range: -40°C to +65°C
- Relative Humidity Range: 4% to 100% (Condensing)
Electrical Data
- Input Data
- Commonly Used Module Pairings: 320W to 460W+
- Module Compatibility: 96-Cell PV Modules
- Maximum Input DC Voltage: 80 Volts
- Peak Power Tracking Voltage: 53V-64 Volts
- Operating Range: 25V-80 Volts
- Min / Max Start Voltage: 30V / 80 Volts
- Max DC Short Circuit Current (Module Isc): 10 Amps
- Overvoltage Class DC Port: II
- DC Port Backfeed Under Single Fault: 0 Amps
- PV Array Configuration: 1 x 1 Undergrounded Array; No Additional DC Side Protection Required; AC Side
- Protection Requires Max 20A per Branch Circuit
- Output Data (AC)
- Peak Output Power: 320 VA
- Maximum Continuous Output Power: 315 VA
- Nominal Voltage / Range: 240V / 211-264V
- Nominal Output Current: 1.31 Amps
- Nominal Frequency: 60 Hz
- Extended Frequency Range: 47-68 Hz
- Maximum Units per 20 A (L-N) Branch Circuit: 12 (240 VAC)
- Overvoltage Class AC Port: III
- AC Port Backfeed Current: 0 Amps
- Power Factor Setting: 1.0
- Power Factor (Adjustable): 0.7 Leading … 0.7 Lagging
- Efficiency: 97.5%