Enphase Energy IQ7-60-2-US Microinverter 235W-350W+ 250VA MC4 DC connector

Product description

Enphase, IQ 7 Micro Inverter, compatible with 60-cell PV modules (only), 208/240 volt, 250VA Peak Power, MC4 DC connectors, Female AC Connector, IQ7-60-2-US

The high-powered smart grid-ready Enphase IQ 7 Micro and Enphase IQ 7+ Micro achieve the highest system efficiency.

Part of the Enphase IQ System, the IQ 7 and IQ 7+ Micro integrate seamlessly with the Enphase Envoy-S, and the Enphase Enlighten monitoring
and analysis software.

The IQ 7 and IQ 7+ Micro extend the reliability standards set forth by previous generations and undergo over a million hours of power-on testing, enabling Enphase to provide an industry-leading warranty.

SKU IQ7-60-2-US Categories ,



  • Easy to Install – Lightweight and simple. Faster installation with improved, lighter two-wire cabling.
  • Productive and Reliable – Optimized for high powered 60-cell modules. More than a million hours of testing. Class II double-insulated enclosure.
  • Smart Grid Ready – Complies with advanced grid support, voltage and frequency ride-through requirements. Remotely updates to respond to changing grid requirements. Configurable for varying grid profiles.

General Information

  • Manufacturer: Enphase Energy
  • Product Line: IQ7 Series
  • Model ID: IQ7-60-2-US

Mechanical Data

  • Technology: Micro-Inverter
  • Dimensions: 8.34 x 6.89 x 1.19 Inches
  • Weight: 2.38 lbs
  • Connector Type: MC4 (or Amphenol H4 UTX with Additional Q-DCC-5 Adapter)
  • Cooling: Natural convection – No Fans
  • Approved for Wet Locations: Yes
  • Pollution Degree: PD3
  • Enclosure: Class II Double-Insulated
  • Environmental Category / UV Exposure Rating: Outdoor – IP67
  • Communication: Power Line Communication (PLC)
  • Monitoring: Enlighten Manager and MyEnlighten Monitoring Options. Compatible with Enphase IQ Envoy
  • Compliance (Pending): AS 4777.2, RCM, IEC/EN 61000-6-3, IEC/EN 62019-1, IEC/EN 62109-2
  • Ambient Temperature Range: -40°C to +65°C
  • Relative Humidity Range: 4% to 100% (Condensing)

Electrical Data

  • Input Data
  • Commonly Used Module Pairings: 235W to 350W+
  • Module Compatibility: 60-Cell PV Modules
  • Maximum Input DC Voltage: 48 Volts
  • Peak Power Tracking Voltage: 27V-37 Volts
  • Operating Range: 16V-48 Volts
  • Min / Max Start Voltage: 22 V / 48 Volts
  • Max DC Short Circuit Current (Module Isc): 15 Amps
  • Overvoltage Class DC Port: II
  • DC Port Backfeed Under Single Fault: 0 Amps
  • PV Array Configuration: AC Side Protection Requires Max 20A per Branch Circuit
  • Output Data (AC)
  • Peak Output Power: 250 VA
  • Maximum Continuous Output Power: 240 VA
  • Nominal Voltage / Range: 230V / 184-276V
  • Nominal Output Current: 1.04 Amps
  • Nominal Frequency: 50 Hz
  • Extended Frequency Range: 45-55 Hz
  • Maximum Units per 20 A (L-N) Branch Circuit: 16 (230 VAC)
  • Overvoltage Class AC Port: III
  • AC Port Backfeed Current: 0 Amps




Enphase Energy Warranty
IQ7 and IQ7PLUS Installation
IQ7 and IQ7PLUS Specs