• Fits both, M215 and M250
  • For Portrait orientation install
  • Each drop has 40″ wire
  • For 3-Phase applications (208V)
SKU ET10-208-SINGLE Categories ,

Out of stock


Manufacturer Enphase Energy
Model ET10-208-SINGLE
Length [mm (in)] 1,025 mm (40 in)
Weight [kg (lb)] (1 lb)
Cable (Wire) Size [mm² (AWG)] 12AWG
Jacket Color Black
Cable Voltage Rating [V] 208
Additional Characteristics
Voltage 208VAC, 5 conductors
Connector Spacing 1.025 meter (40”)
Accommodates PV module orientation Portrait
Cable temperature rating 90°C (194°F) wet/dry
Cable insulator rating THWN-2
UV exposure rating UL 746 C, F1
Conductor gauge 12AWG
Compliance UL1741; CAN/CSA C22.2 Nos. 0, 21, 42, 65, 153, 182.1, 182.2, and 182.3; IEC 60529 IP67




ENPHASE 208VAC 3-Phase Engage Trunk Cable For M215 and M250 PORTRAIT MOUNTING (40″), ET10-208-SINGLE, Sold per drop

Fits both, M215 and M250

For Portrait orientation install

Each drop has 40″ wire

For 3-Phase applications (208V) 

The Engage Cable is a continuous length of 12AWG cable with pre-installed connectors for Enphase Microinverters to plug into. The cable is handled like standard outdoor-rated electrical wire, allowing it to be cut, spliced and extended as needed.

The Enphase Energy Microinverter System improves energy harvest, increases reliability, and dramatically simplifies design, installation and management of solar power systems.

The Enphase System includes the microinverter, the Envoy Communications GatewayTM, and Enlighten®, Enphase’s monitoring and analysis software.

The Enphase Microinverter

Enphase has pioneered a new approach to managing solar power that makes solar systems smarter and more efficient.

Traditionally, solar panels are connected together in series circuits fed into a single, central inverter device. This means that one inverter controls tens, hundreds or even thousands of solar panels as if they are one unit operating at the same power level. This approach reduces the overall system efficiency and limits the available information about individual panel health.

Enphase replaces these large central inverters with small micro-electronics that attach to each solar panel. These devices, known as microinverters, allow each panel to operate independently, leading to significant improvements in energy production and adding a new layer of intelligence throughout the system.

The Enphase System

Each Microinverter integrates with advanced networking technology and web-based software to enable new levels of intelligence and connectivity in the solar array.

Specifically, the Enphase Microinverter System consists of the following components:

The Microinverter that connects to each solar module and converts DC power to grid-compliant AC power

The Envoy Communications Gateway that networks with each microinverter and transmits performance information to the internet

The Enlighten software where Enphase customers can monitor and manage their solar power systems 24 hours a day