Magnum Battery Monitoring Kit, State of Charge Meter, Includes 500A DC Shunt, ME-BMK

Description

ME-BMK-NS BATTERY MONITOR KIT

The ME-BMK-NS (Battery Monitor Kit – No Shunt) from Magnum Energy gives you a “fuel gauge” type of meter for your battery bank. It monitors the battery bank and reports the percentage state of charge, real time amps, voltage, amp-hours in/out, and the minimum/maximum DC volts. The Battery Monitor Kit includes the sense module, sense and communication cables. This ME-BMK-NS is identical to the ME-BMK except it does not include the 500A/mV shunt. However, this shunt is required to be installed in the battery system for the Battery Monitor to work.

• The ME-BMK-NS requires a Magnum inverter with a “Network” port and a ME-RC (revision 2.0 or higher) or ME-ARC remote control.

ME-BMK BATTERY MONITOR KIT

The ME-BMK (Battery Monitor Kit) from Magnum Energy gives you a “fuel gauge” type of meter for your battery bank. It monitors the battery bank and reports the percentage state of charge, real time amps, voltage, amp-hours in/out, and the minimum/maximum DC volts. The ME-BMK includes the sense module, sense and communication cables, and a 500 amp shunt.

• The ME-BMK-NS requires a Magnum inverter with a “Network” port and a ME-RC (revision 2.0 or higher) or ME-ARC remote control.

Monitoring your battery bank is easy with the Battery Monitor Kit (ME-BMK) from Sensata Technologies. Acting as a “fuel gauge” for your batteries, the ME-BMK monitors their state of charge (SOC) and then provides this information in an easy-to-understand display via the ME-ARC or ME-RC remotes. With accurate SOC readings, you can avoid
unnecessary battery recharging, saving on fuel and long-term maintenance costs. If you already have a Magnum brand Inverter/Charger and Magnum brand Remote, the ME-BMK is an easy retrofit. Simply install the kit according to the installation manual and begin monitoring your battery bank via the “Meter” button on your ME-RC.