This is an off-grid system with a battery backup.
Midnite Solar pre-wired inverter systems offer a turn key solution to installing a battery based inverter system, saving you time in the field.
With a pre-wired solution all of the confusion is taken out of selecting all the right parts. This system uses the Schneider Electric Conext SW inverter that is rated at 4,000 watts and uses a 48 volt battery. It produces 120/240 volts AC. Dont forget to look at our other products that compliment the pre-wired inverter system like our Battery Boxes or Disconnecting Combiners.
Our pre wired systems can be configured in about any way needed with any of the common battery based inverters (except Outback). Please contact us for a quote if the System you need is not listed. Below is a simple list of the major components included in the system.
The Whizbang Jr (MNWBJR) current sense module for Classic provides battery state of charge and is included with this product. This system is also available using the Schneider Conext SW2524 Or the Schneider Conext SW4024 NOTE: We use a 175 amp main breaker on this system so you can use 2/0 battery cable, Schneider uses the 250 amp breaker on all of the SW inverters because they have them and don’t stock the 175 amp breaker. The 250 is fine but it forces you to install 4/0 cable and the continuous current draw on this inverter is 91 amps so 2/0 is plenty.
FEATURES: Environmental Rating – Type 1 (Indoor) Schneider Electric Conext SW Pre-Wired 4048 120/240 vac Inverter for Off Grid Schneider System Control panel SW E-Panel MidNite Back Plate (MNSW-BP) AC Bypass Assembly Classic 200 charge controller with DC-GFP (Ground Fault protection) and Arc Fault protection built in. Three MNSPD300’s (Surge Protection Devices) 175 amp Battery Main Breaker for the SW Inverter Warranty – 5 yrs. MidNite E-Panel, Classic Charge Contoller and SPD’s made in the USA Schneider SW Inverter made in India Listed by ETL for US & Canada.