Hollaender T-Fitting, 1-1/2", A-TEE, 5E-8

  • The 535.0 aluminum-magnesium alloy used to make these fittings is the most corrosion resistant alloy available. Hollaender is supporting this fact with a 10 year warranty against corrosion on the fitting itself.
  • This alloy is strong, lightweight, will not rust, and can be used with galvanized steel or other metals without concern for galvanic corrosion.
  • Made in the USA with 100% US content
  • Simple installation
  • No bolts, only (2) set screws to tighten with a hex key.
  • Set screws have a proprietary internal/external knurled cup point that prevents loosening as long as torqued per specification.
SKU SE-H-MR-1 Category

Description

Hollaender manufactures a large selection of structural fittings that can be used with standard pipe to create various types of solar panel mounting systems, both ground and roof. The 1-1/2″ 5E Tee is made of aluminum-magnesium alloy and comes with two (2) set screws for easy installation.

As solar installers try to minimize the number of penetrations on rooftops, and therefore increase the span distances between vertical supports, the issue of cross bracing becomes exceedingly important. Hollaender has a series of fittings that can be used to attach cross bracing sections in a pipe rack.

The Hollaender #17 Adjustable Elbow is a 2-piece fitting that is adjustable across a broad range of angles. The male (M) part typically attaches to the vertical post and the female (F) part attaches to the cross brace member. Until now, these have only been available in the same size for both parts, i.e. 2” IPS – 2” IPS, or 1-1/2” IPS – 1-1/2” IPS.

STRUCTURAL STRENGTH

Hollaender® fittings, when torqued to the settings indicated have the following support and holding strengths when attached to galvanized steel pipe:

Fitting size Torque (ft lb) Holding and support force w/2 set screws Holding and support force w/1 set screw
1-1/4″ IPS 14 2000 lb 1800 lb
1-1/2″ IPS 17 2350 lb 1850 lb
2” IPS 17 3200 lb 1925 lb

Additional information

Weight 0.5 lbs
Dimensions 2.5 × 2.5 × 3.5 in

Downloads